Saturday, July 19, 2014


Needed files and tools
Stock ROM - See list of Samsung Galaxy Y S5360 stock ROMs below (extract the file after downloading)
Odin Multi-downloader - Odin3_v1.84
PIT file - totoro_0623.pit
Driver - You need to install Kies or get the driver of your phone if you have no Kies previously installed.
USB cable - use the supplied USB cable of your Galaxy Y. (Odin will not work in Mac and Linux OS).
PC or laptop - running on Windows or later OS.
Your Phone - Samsung Galaxy Y GT-S5360

Preparation before Flashing
Back-up all of your important data stored in the phone like contacts, messages and etc. Flashing will wipe and delete all of it.
Ensure that your phone is fully charge or above 80% charge. (If your phone had an auto-shutdown history, and its too old, use a newer or good working battery.
Remove the SIM card and the external memory card. (not necessarily but recommended to avoid any certain issues)
Disable and Close Antivirus, Kies and any running software windows.
Hard Reset - We often do hard reset before flashing to clean the memory cache of the phone. Master reset code *2767*3855# .

ODIN Flashing Procedures for Samsung S5360 Galaxy Y
1. Run the ODIN Downloader v1.84 on your PC desktop.
2. Load the firmware binary files on each designated button spaces.

How to Flash with Multiples files with Pit, Bootloader, PDA, PHONE/MODEM and CSC file
This is full flashing and useful for unbricking for it has a full packaged with individual file allocations, this type of files we often used to fix a bricked Samsung Android devices. Some firmware updates have like this one and some are came into just a single file packaged.

Click on each button and load the appropiate file unto it.
Pit Button - select and load the totoro_0623.pit 

Bootloader - look for the file with the word Boot,
like DefaultCalDataWithBoot_S5360XXXXX_REV05.tar.md5

PDA button - look for the file with the letters PDA or CODE on it,
like PDA_S5360XXXXX_REV05.tar.md5

PHONE button- look with the word MODEM file,
like MODEM_S5360XXXXX_REV05.tar.md5

CSC button - associated also with letters CSC or Multi_CSC,
like GT-S5360-MULTI-CSC-OXXXXX.tar.md5

There are three checkboxes on the left side of ODIN, the Re-Partition, Auto Reboot and F.Reset Time.
The Auto Reboot and F.Reset Time are often always checked in flashing while the Re-Partition will only be checked if you want to fix the memory partition of the phone, now if you'll only want to upgrade or downgrade DO NOT CHECK THE REPARTITION.

DO NOT CHECK RE-PARTITION - Safety for Upgrade and Downgrade
Samsung Galaxy Y S5360 firmware update Odin flashing without Re-Partition

Full Flashing with RE-PARTITION enabled - Advisable only for fixing Soft bricked devices
Samsung Galaxy Y S5360 firmware update Odin flashing with Re-Partition

How to Flash with Only a Single file.
Some files came only in a single packed like with tar.md5 file extension., and a 'SS_DL.dll' file also included on it. Others are confused where to put this file. Well, the S5360XXXXX_S5360XXXXX_S5360XXXXX_HOME.tar.md5 goes to the PDA button section while the 'DLL' file in not to be used but don't delete it, a dll file means a driver.
Again the "Repartition" check-box is not to be tick, only the Auto-Reboot and F.Reset Time are checked.

Note: One packaged file will not tend to work with available Odin version for now but the complete packaged will work. For those who are looking on how to revert back your devices back to official stock or fixes softbricks and bootloops you can use this following bundled stock ROM  packaged below.

Samsung Galaxy Y S5360 Odin Flashing single file stock ROM firmware

Setting up the Samsung Galaxy Y into Download Mode and Connecting to PC.
You need to set the device into download mode in order to let Odin recognize it. To set into download mode
Turn OFF the phone, then hold and press the three buttons Volume Down + Home + Power Key simultaneously. If you'll still not get into download mode, remove the battery a couple of seconds then put it back again and then press the download mode button combination again.

Samsung Galaxy Y S5360 Download mode buttons

Once the phone displays the Android robot and says "Downloading..." Connect the phone to PC with the supplied USB cable. Odin will automatically recognize it if it's properly connected, the ID:COM mapping will highlight to color yellow and says "added" on the log box.

Start Flashing
Hit the "Start" Button when all are set perfectly to begin flashing.
Samsung Galaxy Y S5360 Odin Flashing

CAUTION: Avoid touching the phone while the flashing already started, any interruption will result into serious issues like soft-brick or hard-brick.

Let the flashing completes, a progress bar displays until the firmware downloading process finishes. It only takes around 3 to 5 minutes, depends of your PC speed.
When a word "PASS" appears, it means that the flashing is successful. The phone will then reboot and after completely rebooted it is then safe to remove it from computer's connection.
Samsung Galaxy Y S5360 Odin successful flashing

Do a hard reset again by the code *2767*3855#  or in recovery mode hold and press Volume UP+Home+Power key. Navigate to the Wipe Data cache/Factory Reset.
Some other tweaks:
1) To check your  recent firmware info *#1234#
2) CSC configuration - IMEI number check [*#06#]
3) *#272*[IMEInumber]#
4) Choose sales code

Odin Flashable Bundles that Works for Samsung Galaxy Y by Doky73
These are rebundled Samsung Galaxy Y firmwares by XDA-Developer highly recognized member Doky73 that are100% tested and perfectly works on Samsung Galaxy Y S5360 odin flashing.

(format: PHONE / CSC / MODEM versions)


All Kinds Of New Mobile Unlocking - I Phone - Blackberry - Samsung - Htc - Nokia -All Android Mobile Unlocking And Official Firmware Flash Here. .


Post a Comment



Copyright @ 2013 the flash file bd

Designed by Templateify & Sponsored By Twigplay